~ MAGNUM - 3000 ~

The Ultimate Burglary-Fire-Access Control Protection in one Highly Advanced "DO-IT-ALL" Multi-Tasking System.

• 12 to 96 Fully Programmable Zones designed for UL Commercial and residential burglary and fire.• Includes 8 True Partitions• 96 Multi-function User Codes• 800-Event History Log with Real Time Clock• 255 Event Scheduler• 8 to 64 Programmable Auxiliary Relay Outputs Provision for the Incorporation of Home Automation and Derived Channel/Long-Range Radio Phoneline Backup Systems• Fuseless Auto-Resettable Polyswitches• Built-In Access Control Capability - Up to 8 points of access control enabled at the Keypad. Access codes can be logged by station, user ID and time.• The access control output is immediately available through the PMG wire at each Keypad.• Exclusive Sensor Watch Feature continuously monitors motion detectors for proper operation.

CONTROL PANEL

• 8 E.O.L Supervised, Programmable Zones for Burglary, 2- or 4- Wire Fire/Commercial Fire or Panic• Expandability to 96 Zones with use of EZM multiplex modules or keypad zones• Programmable Relay Outputs (1 for pulse) for: bell, access control, fire reset, etc.• Up to 96 Zones programmable for fire and "alarm verification by zone"• 800 Event History Log with Real Time Clock• Log can be sorted for printing or displayed at keypad by 4 different categories.• 0/C, system troubles, alarm, fire• Keypad Recall of Events in History Log• Up to 8 Programmable Areas/Partitions with Keypad Management Mode• 96 individually-reporting User Codes w/4 programmable security levels each• Secured Bypass Option-disallows bypassing by other than authorized users (based on security level)• Two Separate Interior Bypass Options per area• Auto Arm/Auto Disarm - Auto arming/disarming at a predesignated time with holiday scheduling• Manual Auto Arm - Enables delayed arming of system or area(s) by 1,2,3 or 4 hours• 255 Event Schedule, Programmable for 296 types of events including: test timer, remote relay enable/disable, auto arm/disarm service reminder message, log down load, and download at pre-designated increments of events• On Board Supervised Printer Output -Capability to print log as events occur, or as selected, i.e., open/closes, or in entirety per programmed schedule or with keypad• Programmable Log Download By Time and Volumes (600 -750)• Audible EZM Zone Locator• Programmable E.O.L. Resistor by zone.• Diagnostics Mode• Dynamic Battery Test (4 hr. intervals)• Sensor Watch - Checks for sensor activity over selectable time duration• Exit/Entry Follower Zones• Chime-by-Zone-Selectable Duration• Swinger Shutdown by Zone• Disable by Zone Feature• Separate Dealer, User Program and Download Codes• Flexible Watch Modes by Area• Fire verification by zone• Auto Bypass, Interior Bypass, and Selectable Bypass• 2 Separately Programmable Entry Delay Times; programmable Exit Delay Time• 8 Stages of Lightning/RFI Protection• "True" Dual Line Telco Cut Detection• 24-hour protection programmable for all zones• Fail to communicate indicated at command centers• Armed Output• Low Battery Output• Resumes Previous Status After Power Outages• "Program Change Alert" to CS -supervises integrity of original program

• Transmits in all Major Formats, Including High Speed Modem Formats: SIA MODEM 2, POINT ID, 4/3/1• Pager/Beeper Compatibility• DPDT line seizure• 4 Telephone numbers with subscriber ID numbers assignable by area• Open/Close Suppression for Reduced Central Station Traffic• Fail-to-Close Reporting and Fail-to-Open Reporting with Auto Open (Disarm)/Close (Arm)• Telco Line Monitoring for Phone Line(s) with Programmable Testing Time(s) (2nd Line Provided by CF5530 Commercial Fire Module)• Digital Dialer Test to Central Station from Keypad• Optional Reporting of Bypassed Zones• Reports Sensor Watch "Troubles"• Ability to Dial Touch Tone digit labeled ("*"key) to disable "Call Waiting" for the duration of the call (not usable in all areas)• Open report after alarm• Split, double and back-up reporting• Conditional closing report with status• Alarm and restore codes: on fire, fire trouble, low battery and AC loss

• RP3000LCDe - Backlit Dual-Line LCD Custom Language Display (WHITE)• CF3000LCDe Fire Marshall Version (RED)• Each Keypad Incorporates Built-in EZM for Four Additional, Fully-Programmable E.O.L.R. Multiplexed Zones• Auto Scroll-Display of Open Zone(s)• System Supports up to 15 Keypads, Providing a Total of up to 60 Additional Zones• Fully-Supervised with Tamper Feature• Each Keypad Includes 4 Independent, Selectable Panics: Ambush, Fire, Auxiliary, Panic• Built-in Telephone List: Four Programmable Emergency Phone Numbers• Keypad Recall of Events in History Log• Total or Selective History Log Print Commands at Keypad• Manual Auto Arm - Provides Delayed Arming of System or Area(s) by 1 through 4 hours• Overview/Management Mode Codes Enable Viewing of Status of Entire System or Each Area, and Provides Complete System Control Simply from a Keypad• Complete Alphanumeric Zone Directory• Backlit, Touch-Tone Full-Size Keys Brighten When Touched